Summary of Position
This position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, setup and operate equipment, and perform visual and dimensional inspections on machined components.
Essential Functions
- Must be knowledgeable of, and adhere to, the TOMZ Quality Management System.
- Ability to operate and maintain production on equipment within the department. Ex. include Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, Willemin Mill turns, various 3-4-5 axis mills, Anodize/Passivation Lines.
- Demonstrated ability to perform offsets and change tools to maintain efficient production with minimal support.
- Ability to efficiently set up complex legacy components and complex new production orders and ensure the machine is ready for steady production.
- Perform visual and dimensional inspections on manufactured components, as required using microscope, micrometer, caliper, pin gages, thread gages, comparator, micro-hite, CMM, vision system, etc.
- Regularly and as prescribed, perform preventive maintenance of equipment.
- Lead and train on problem solving activities for complex machine or process issues.
- Completes and compiles necessary documentation related to Quality Inspection standards.
- Ensure proper material control, identification and traceability is maintained for conforming and nonconforming material through the manufacturing processes.
- Lead and train on Quality Best Practices and GDP/GMP continuous improvement efforts.
- Utilize and navigate ERP and QMS systems to ensure inspection and traceability activities are properly documented and controlled, as needed.
- Fit and assemble parts into complex assemblies when required.
- Perform Zeiss (or similar) CMM Gage R&R activities for NPI.
- Perform all AQL data needed when running production with all data entered to the ERP system.
- Perform Qualification runs on NPI to the customers specifications.
- Perform 1st article inspection with minimal support.
- Provide guidance and training to Machinists level I, II & III.
- Perform FANUC (or similar) robot adjustments on basic programs.
- Must maintain safe working conditions and follow occupational Safety and Health requirements including Personal Protective Equipment (PPE) guidance and rules.
- Other duties and responsibilities are assigned.
Qualifications:
Education
- Certification from a Machine trades technical school program, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
Experience
- Certification from a Machine trades technical school program and ten years relevant work experience in a regulated medical manufacturing environment, or fifteen years in a regulated medical manufacturing environment.
Qualifications
- Class I, II and/or III Medical Device manufacturing experience.
- Knowledge of and experience with GMP/ISO standards.
- Advanced understanding of the usage and care of mechanical equipment and inspection processes.
- Ability to use hand-held tools to perform preventive maintenance or repair activities and install or change tools.
- Experience editing programs through machine controls.
- “Hands-on” self-starter with ability to work both independently and as part of a team.
- Ability to effectively read and understand blueprints, specifications, GD&T, and procedures.
- Maintains accuracy and attention to detail at all times and completes tasks in a timely manner.
- Ability to work with a variety of functional areas, including R&D, Manufacturing, and QA, as required, accomplishing results with minimal guidance.
Preferred Skills
- Intermediate skills with Microsoft Excel and Word
- Strong verbal and written English language communication skills.
Pay Range: $30 - $38 an hour
Summary of Position This position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high precision metal machining...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485.
Summary of Position
Reporting to the Operations Manager, this position will have direct responsibility for the set-up and manufacture of components within the machining Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machine components.
Essential Functions
- Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills.
- Perform offsets and tool changes to ensure efficient production.
- Set up complex legacy components and new production orders for steady machine operation.
- Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, vision systems.
- Perform scheduled and regular preventive maintenance on equipment.
- Lead and train in problem solving activities for complex machine or process issues.
- Complete and compile documentation related to quality inspection standards.
- Ensure proper material control, identification, and traceability for conforming and nonconforming materials.
- Lead and train in Quality Best Practices and contribute to continuous improvement in GDP/GMP.
- Utilize ERP and QMS systems to document and control inspection and traceability activities.
- Perform Zeiss (or similar) CMM Gauge R&R activities for NPI.
- Perform all AQL in production with all data being entered into the ERP system.
- Perform Qualification runs on NPI to the customers specifications.
- Perform the first article inspection with minimal support.
- Capable of mentoring and training lower-level machinists.
- Perform FANUC (or similar) robot adjustments on basic programs.
- Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- Certification from a Machine trades technical school program, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
Experience
- Certification from a Machine trades technical school program and ten years relevant work experience in a regulated medical manufacturing environment, or fifteen years in a regulated medical manufacturing environment.
Qualifications
- Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials.
- Knowledge of and experience with GMP/ISO standards.
- Advanced understanding of mechanical equipment usage, care, and inspection processes.
- Ability to use hand-held tools for preventive maintenance, repairs, and tool changes.
- A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance.
- Proficient reading and understanding of blueprints, specifications, and procedures.
- Detail-oriented with the ability to maintain accuracy and complete tasks promptly.
- Proficient in identifying nonconformances and maintaining organization.
- Advanced skills in Excel and Microsoft word.
- Strong verbal and written English communication skills.
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required.
- Ability to sit or stand for prolonged periods.
Job Features
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive com...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485.
Summary of Position
Reporting to the Operations Supervisor, this position will have direct responsibility for the manufacturing of components through various basic functions within the Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, operate equipment, and perform visual and dimensional inspections on machine components.
Essential Functions
- Operate and maintain 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes.
- Perform visual and dimensional inspections on manufactured components, as required using a microscope, micrometer, caliper, pin gauges, thread gauges, comparator, Micro-Hite, etc.
- Support problem-solving activities for complex machine or process issues.
- Complete and compile documentation related to quality inspection standards.
- Ensure proper material control, identification, and traceability for conforming and nonconforming materials.
- Support Quality Best Practices and contribute to continuous improvement efforts of GDP/GMP.
- Utilize ERP and QMS systems to document and control inspection and traceability activities.
- Must maintain safe working conditions and follow occupational safety and health requirements including Personal Protective Equipment (PPE) guidance and rules.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Experience
- Minimum of 0-2 years’ experience in a regulated manufacturing environment.
Qualifications
- Basic understanding of the usage and care of mechanical equipment and inspection processes.
- Ability to use hand-held tools for preventive maintenance, repairs, and tool changes.
- Ability to effectively read and understand blueprints, specifications, and procedures.
- Detail-oriented with the ability to maintain accuracy and complete tasks promptly.
- Basic understanding of GD&T.
- Knowledge of GMP/ISO standards.
Preferred Skills
- Class I, II and/or III Medical Device manufacturing experience.
- Regulated manufacturing industry experience (e.g., aerospace, defense, pharmaceutical, etc.).
- Strong verbal and written English language communication skills
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required.
- Ability to sit or stand for prolonged periods.
2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM
1st shift- No differential
Pay range: $21.00 - $27.00 / hr
Job Features
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive com...
Summary of Position
Reporting to the Engineering Manager, this position will support the Manufacturing Engineering team in developing and implementing robust cost-effective manufacturing processes and methods along with day-to-day tasks. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices.
Essential Functions
- Prepares engineering change orders and coordinates the deployment of changes including training operation team members.
- Develop and qualify various tools and equipment required for manufacturing processes.
- Develop and improve manufacturing process instructions, product flow, assembly methods, space allocation, product quality and safety performance for both sustained and new products.
- Perform tool life studies to drive efficiency and cost savings opportunities.
- Conduct Process Capability studies during manufacturing processes to support achieving objectives.
- Collaborates with cross-functional teams during the production transfer phase to establish and launch robust, mid to high volume processes.
- Supporting required equipment qualification and process validations (IQ, OQ and PQ).
- Troubleshoot manufacturing processes when defects occur.
- Disposition non-conforming products and develop re-work procedures.
- Participate in Kaizen events and continuous improvement efforts.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- Pursuing a degree in Engineering or equivalent experience.
Experience
- N/A
Qualifications
- Must possess a high attention to detail.
- Familiar with reading drawings and specifications containing GD&T.
- Proficiency in SolidWorks.
- Proficient in the use of Microsoft Office and Adobe products.
- Ability to work in a fast-paced Medical Device Manufacturing environment with high output efficiency and impeccable quality standards.
Preferred Skills
- Exhibit good time management skills and ability to prioritize workflow throughout the day.
- Motivated self-starter with ability to work both independently and as part of a team.
- Strong verbal and written English language communication skills.
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 20 pounds. Team lift or mechanical assistance required for objects over 20 pounds.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, dust, metal particles, sparks, sharp-edged materials. Some exposures may require the use of personal protective equipment or engineering controls.
- Perform keyboard entries with possible frequent operation of a computer
Summary of Position Reporting to the Engineering Manager, this position will support the Manufacturing Engineering team in developing and implementing robust cost-effective manufacturing processes and...
Summary of Position
The Assembly Test Technician is responsible for the set up and operation of various presses, fixtures, custom tooling, and measuring equipment used to produce complex finished assemblies from detail components. Understanding of blueprints, inspection reports, fixturing, and precise measuring will be required for daily tasks.
Essential Functions
- Setup and operation of presses, fixtures, and complex equipment.
- Comprehend and interpret drawings and comprehend work instructions.
- Complete inspection reports based off supplied blueprints.
- Proficiency with hand tools, basic assembly techniques, and measuring tools.
- Attention to detail while checking the function of the assembly per drawing requirements.
- Prior work experience in a regulated medical manufacturing environment or other highly regulated industrial manufacturing environment.
- Always maintains accuracy, attention to detail and completes tasks in a timely manner.
- Computer competency in a manufacturing environment.
- All other duties as assigned.
Qualifications:
Education
- High-school diploma or equivalent.
Experience
- 1-3 years’ experience in a manufacturing environment.
Qualifications
- Comprehension of blueprints
- Experience with hand operated tools
- Familiar with measuring equipment
- Maintains accuracy and attention to detail at all times and completes tasks in a timely manner
- Prior experience work experience in a regulated medical manufacturing environment or regulated medical manufacturing environment.
Job Features
Summary of Position The Assembly Test Technician is responsible for the set up and operation of various presses, fixtures, custom tooling, and measuring equipment used to produce complex finished asse...
Summary of Position
Reporting to the Department Manager, this position will have direct responsibility for the processing of parts through various functions within the Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, prepare materials to be processed through various operations, and perform basic visual and dimensional inspections on completed components.
Essential Functions
- Prepare and process components through various metal finishing operations.
- Tumbling
- Blasting
- Heat Treat
- Laser Welding
- Laser Marking
- Passivation
- Anodize
- Perform visual and basic dimensional inspections on completed components, as required using micrometers, calipers, microscope, etc.
- Completes and compiles necessary documentation related to Quality Inspection standards.
- Ensure proper material control, identification and traceability is maintained for conforming and nonconforming material through the manufacturing processes.
- Support Quality Best Practices and GDP/GMP continuous improvement efforts.
- Utilize and navigate ERP and QMS systems to ensure inspection and traceability activities are properly documented and controlled, as needed.
- Must follow occupational Safety and Health requirements including Personal Protective Equipment (PPE) guidance and rules.
- Other duties and responsibilities are assigned.
Qualifications:
Education
- High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
Experience
- Minimum of 0-2 years’ experience in a regulated manufacturing environment.
Qualifications
- Ability to use basic hand-held tools to support preventive maintenance activities.
- Maintains accuracy and attention to detail at all times and completes tasks in a timely manner.
- Strong verbal and written English language communication skills.
- Strong background concerning the usage and care of mechanical metal finishing equipment and processes.
- Must have good organizational skills.
Preferred Skills
- Ability to effectively read and understand blueprints, specifications, and procedures.
- Knowledge of and experience with GMP/ISO standards.
- Regulated manufacturing industry experience (e.g. Aerospace, Defense, Pharmaceutical, etc.)
- Class I, II and/or III Medical Device manufacturing experience
Physical Demands
While performing the duties of this job, the employee is frequently required to sit, talk and/or hear, and/or use hands to finger, handle, or touch objects, tools, or controls. The employee is frequently required to stand, and/or walk. The employee must occasionally lift and/or move up to 50 pounds while moving components or fixtures/racking. The mental and physical requirements described here are representative of those that must be met by an individual to successfully perform the essential functions of this position.
Job Features
Summary of Position Reporting to the Department Manager, this position will have direct responsibility for the processing of parts through various functions within the Department. TOMZ manufactures pa...
Summary of Position
Reporting to the cell lead, this position will have direct responsibility finishing and preparing machined parts by removing burrs, sharp edges, and excess material using hand tools, power tools, and finishing equipment. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation ensures parts meet quality standards and specifications before final processing, assembly, or shipment.
Essential Functions
- Perform deburring, polishing, and surface finishing on machined or fabricated components.
- Use hand tools (files, scrapers, deburr knives, sandpaper), power tools, and tumbling equipment to remove sharp edges and imperfections.
- Inspect parts for quality conformity using calipers, micrometers, gauges, and visual inspection.
- Follow work orders, prints, and specifications to ensure parts meet customer and internal requirements.
- Maintain accuracy and attention to detail while working with small and delicate parts.
- Operate bead blast or tumbling equipment (as applicable).
- Clean, organize, and maintain workstation and tools.
- Report nonconforming parts or material issues to production or quality personnel.
- Meet production goals and timelines while maintaining high quality standards.
- Follow safety guidelines and company procedures at all times.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
- Certification from a technical school program is strongly preferred.
Qualifications
- Strong manual dexterity and ability to handle small components.
- Ability to read basic blueprints and interpret work instructions.
- Familiarity with measurement tools (calipers, micrometers, gauges).
- Strong attention to detail and quality-driven mindset.
- Precision and quality-focused
- Time management and ability to meet deadlines
- Communication and teamwork
- Problem-solving and adaptability
- Hand-eye coordination and fine motor skills
Preferred Skills
- Previous experience in deburring, machining, or manufacturing environment is a plus.
- Regulated manufacturing industry experience (e.g., Aerospace, Defense, Pharmaceutical, etc.)
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Exposure to oil, grease, dust, metal particles, sparks, sharp-edged materials. Some exposures may require the use of personal protective equipment or engineering controls.
- Ability to sit or stand for prolonged periods.
- Good eyesight and focus for detailed work.
- Manufacturing floor environment with moderate noise levels.
$16 - $22 an hour
Summary of Position Reporting to the cell lead, this position will have direct responsibility finishing and preparing machined parts by removing burrs, sharp edges, and excess material using hand tool...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a Senior Maintenance Machine Specialist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and is certified to ISO 13485.
Summary of Position
The purpose of the Senior Maintenance Machine Specialist is to provide production equipment support for all equipment allocated to the Factory as well as to assist engineering with production-related projects. Routinely works with Plant Maintenance to coordinate jobs and projects. The Senior Maintenance Machine Specialist will take the lead in the implementation and the decision-making process on best practices for the maintenance group. The position is also responsible for creating solutions and providing technical support to enhance production reliability through concerted efforts with cross functional teams.
Essential Functions
Duties and responsibilities include, but are not limited to:
- Adherence to all department safety measures and work instructions.
- Accountable for personal safety, the safety of co-workers and promoting a safe work environment.
- Repair and maintain all production equipment, both electrical and mechanical.
- Assist engineering as required with special machine related projects.
- Work with CONC and PLC controlled machines.
- Routinely work in electrical control panels of production equipment to troubleshoot electrical problems.
- Arc Flash certified worker to work “live” electrical control panels.
- Working understanding of precision measuring instruments used in troubleshooting.
- Read and interpret diagrams, schematics and specifications related to equipment operation.
- Monitor, modify, or write programmable ladder logic circuits as needed for existing or new installations.
- Create electrical drawings, PLC programs to be used for troubleshooting of modified equipment.
- Install electrical, air and data drops to equipment and machines.
- Work with outside contractors for equipment repair of production machines as needed and verify completion accuracy.
- Design and implement electrical circuits and technologies for support of production equipment.
- Initiate or enhance the preventative maintenance schedules for production equipment.
- Calibrate equipment using general and special purpose test equipment.
- Facilitate equipment modifications, upgrades, overhauls, and root cause failure analyses.
- Ensure respective area is complaint with 5S Standards.
- Maintain daily log of work in established systems.
- Support ISO 13485 initiatives.
- Assist in training individuals with less experience and tenure on established maintenance standards and practices.
- Project initiation and improvement ideas to better production and the business.
- Purchase repair parts, tools, and supplies in appropriate ERP software.
- Provide input for annual department budget planning.
- Ability to work flexible hours (including overtime) to accommodate production working hours as needed.
- Other duties and responsibilities as assigned.
Qualifications:
Education
- Associate degree in a technical related field or equivalent experience
Experience
- Minimum 10 years’ experience in the Equipment Maintenance Field
Qualifications
- “Hands-on” self-starter with ability to work both independently and as part of a team.
- Maintains accuracy, is detail oriented, and completes tasks in a timely manner.
- Prior experience with CNC and PLC controlled equipment.
- Experience with MS Office Programs.
- Ability to perform routine maintenance of CNC manufacturing equipment; troubleshoot issues and support, or directly resolve as appropriate.
- Ability to read and interpret documents and drawings (e.g., blueprints, manuals, wiring diagrams etc.)
- Time management skills and ability to prioritize workflow throughout the day.
- Strong verbal and written English language communication skills.
Preferred Skills
- Forklift and OSHA Training.
Physical Demands
While performing the duties of this job, the employee is frequently required to sit, talk and/or hear, and/or use hands to finger, handle, or touch objects, tools, or controls. The employee is frequently required to stand, and/or walk. The employee must occasionally lift and/or move up to 50 pounds while moving tooling, fixtures, equipment and/or small packages. The mental and physical requirements described here are representative of those that must be met by an individual to successfully perform the essential functions of this position.
Pay Range: $29.81/hr - $43.75/hr
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a Senior Maintenance Machine Specialist to join our organization. TOMZ offers c...
Our Mission
Advancing quality of life by manufacturing medical devices for global healthcare companies.
We Manufacture Medical Devices
We specialize in manufacturing the best medical device implants for medical teams and surgeons around the world. Most of our team will tell you that the work is very fulfilling because we help people live better lives.
Company Values & Culture
Our DNA is as unique as everyone that works here.
Put Patients First
Embrace Diversity
Learn & Grow
Reward Great Effort
Why Work at TOMZ?
We are large enough to offer stability and great benefits, yet small enough to recognize you as an individual and not just “another employee.”
Multiple departments from facilities management to engineering allows you to explore different career paths.
The medical devices industry is experiencing explosive growth with no signs of stopping any time soon.
We have completed our 8th expansion which includes amenities such as locker rooms, showers, an expanded cafeteria, and more.
We have a deep bench of knowledgeable pros to help you.
Everything from 401K to top-of-the-line healthcare, life insurance, and more!
What Our Team Members Have to Say
Playlist
2:37
2:12
Benefits
401(k) Retirement Plan
We will match $0.50 on the dollar up to an 8% contribution. Work with us, retire with us.
Overtime Available
Opportunities to earn overtime hours are available as needed.
Paid Holidays
Enjoy 9 paid holidays off per year.
Paid Time Off (PTO)
PTO starts accruing from the day you start.
Referral Bonus
Employees are eligible to earn a $3,500 referral bonus!
Health Insurance Plans
Enjoy a low employee co-pay with high contributions towards your plan.
Dental Insurance Plans
Yes - we have a great dental plan as well!
Quarterly Bonus
Teams achieving set performance goals receive a quarterly performance bonus.