Summary of Position
This position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, setup and operate equipment, and perform visual and dimensional inspections on machined components.
Essential Functions
- Must be knowledgeable of, and adhere to, the TOMZ Quality Management System.
- Ability to operate and maintain production on equipment within the department. Ex. include Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, Willemin Mill turns, various 3-4-5 axis mills, Anodize/Passivation Lines.
- Demonstrated ability to perform offsets and change tools to maintain efficient production with minimal support.
- Ability to efficiently set up complex legacy components and complex new production orders and ensure the machine is ready for steady production.
- Perform visual and dimensional inspections on manufactured components, as required using microscope, micrometer, caliper, pin gages, thread gages, comparator, micro-hite, CMM, vision system, etc.
- Regularly and as prescribed, perform preventive maintenance of equipment.
- Lead and train on problem solving activities for complex machine or process issues.
- Completes and compiles necessary documentation related to Quality Inspection standards.
- Ensure proper material control, identification and traceability is maintained for conforming and nonconforming material through the manufacturing processes.
- Lead and train on Quality Best Practices and GDP/GMP continuous improvement efforts.
- Utilize and navigate ERP and QMS systems to ensure inspection and traceability activities are properly documented and controlled, as needed.
- Fit and assemble parts into complex assemblies when required.
- Perform Zeiss (or similar) CMM Gage R&R activities for NPI.
- Perform all AQL data needed when running production with all data entered to the ERP system.
- Perform Qualification runs on NPI to the customers specifications.
- Perform 1st article inspection with minimal support.
- Provide guidance and training to Machinists level I, II & III.
- Perform FANUC (or similar) robot adjustments on basic programs.
- Must maintain safe working conditions and follow occupational Safety and Health requirements including Personal Protective Equipment (PPE) guidance and rules.
- Other duties and responsibilities are assigned.
Qualifications:
Education
- Certification from a Machine trades technical school program, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
Experience
- Certification from a Machine trades technical school program and ten years relevant work experience in a regulated medical manufacturing environment, or fifteen years in a regulated medical manufacturing environment.
Qualifications
- Class I, II and/or III Medical Device manufacturing experience.
- Knowledge of and experience with GMP/ISO standards.
- Advanced understanding of the usage and care of mechanical equipment and inspection processes.
- Ability to use hand-held tools to perform preventive maintenance or repair activities and install or change tools.
- Experience editing programs through machine controls.
- “Hands-on” self-starter with ability to work both independently and as part of a team.
- Ability to effectively read and understand blueprints, specifications, GD&T, and procedures.
- Maintains accuracy and attention to detail at all times and completes tasks in a timely manner.
- Ability to work with a variety of functional areas, including R&D, Manufacturing, and QA, as required, accomplishing results with minimal guidance.
Preferred Skills
- Intermediate skills with Microsoft Excel and Word
- Strong verbal and written English language communication skills.
Pay Range: $30 - $38 an hour
Summary of Position This position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high precision metal machining...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485.
Summary of Position
Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment.
Essential Functions
- Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills.
- Perform offsets and tool changes to ensure efficient production with minimal support.
- Set up complex legacy components and new production orders for steady machine operation.
- Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems.
- Perform scheduled and regular preventive maintenance on equipment.
- Drive problem-solving activities for complex machine or process issues.
- Complete and compile documentation related to quality inspection standards.
- Ensure proper material control, identification, and traceability for conforming and nonconforming materials.
- Support Quality Best Practices and contribute to continuous improvement in GDP/GMP.
- Capable of mentoring and training lower-level machinists.
- Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met.
- Utilize ERP and QMS systems to document and control inspection and traceability activities.
- Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted.
- Certification from a technical school program is strongly preferred.
Experience
- Minimum of 3-7 years’ experience in a regulated manufacturing environment.
Qualifications
- Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials.
- Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive.
- Knowledge of and experience with GMP/ISO standards.
- A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance.
- Advanced understanding of mechanical equipment usage, care, and inspection processes.
- Ability to use hand-held tools for preventive maintenance, repairs, and tool changes.
- Skilled in reading and understanding of blueprints, specifications, and procedures.
- Detail-oriented with the ability to maintain accuracy and complete tasks promptly.
- Proficient in identifying nonconformances and maintaining organization.
- Intermediate skills in GD&T.
Preferred Skills
- Strong verbal and written English language communication skills.
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required.
- Ability to sit or stand for prolonged periods.
WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN
2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM
1st shift- No differential
Pay range: $31.00-$37.00
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive com...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485.
Summary of Position
Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment.
Essential Functions
- Set up and operate and maintain Citizen Lathes or Tsugami Lathes
- Perform offsets and tool changes to ensure efficient production with minimal support.
- Set up legacy components and new production orders for steady machine operation.
- Perform preventative maintenance on Swiss Lathe to ensure consistent machine performance
- Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems.
- Perform scheduled and regular preventive maintenance on equipment.
- Drive problem-solving activities for complex machine or process issues.
- Complete and compile documentation related to quality inspection standards.
- Ensure proper material control, identification, and traceability for conforming and nonconforming materials.
- Support Quality Best Practices and contribute to continuous improvement in GDP/GMP.
- Utilize ERP and QMS systems to document and control inspection and traceability activities.
- Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance.
Qualifications:
Education/Experience
- High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
- Certification from a technical school program preferred.
- Minimum of 2-5 years’ experience in a regulated manufacturing environment.
Qualifications
- Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials.
- Strong math background, preferable in machine math/shop math
- Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive.
- Knowledge of and experience with GMP/ISO standards.
- A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with guidance.
- Understanding of mechanical equipment usage, care, and inspection processes.
- Ability to use hand-held tools for preventive maintenance, repairs, and tool changes.
- Effectively read and understand blueprints, specifications and procedures.
- Understanding of GD&T.
- Detail-oriented with the ability to maintain accuracy and complete tasks promptly.
- Identify nonconformances and maintain organization.
Preferred Skills
- Strong verbal and written English language communication skills.
Physical Requirements
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required.
- Ability to sit or stand for prolonged periods
1st shift: 6AM-2:30PM
2nd shift: 5PM-1:30AM (15% SHIFT DIFFERENTIAL)
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive com...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485.
Summary of Position
Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment.
Essential Functions
- Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills.
- Perform offsets and tool changes to ensure efficient production with minimal support.
- Set up complex legacy components and new production orders for steady machine operation.
- Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems.
- Perform scheduled and regular preventive maintenance on equipment.
- Drive problem-solving activities for complex machine or process issues.
- Complete and compile documentation related to quality inspection standards.
- Ensure proper material control, identification, and traceability for conforming and nonconforming materials.
- Support Quality Best Practices and contribute to continuous improvement in GDP/GMP.
- Capable of mentoring and training lower-level machinists.
- Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met.
- Utilize ERP and QMS systems to document and control inspection and traceability activities.
- Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted.
- Certification from a technical school program is strongly preferred.
Experience
- Minimum of 3-7 years’ experience in a regulated manufacturing environment.
Qualifications
- Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials.
- Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive.
- Knowledge of and experience with GMP/ISO standards.
- A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance.
- Advanced understanding of mechanical equipment usage, care, and inspection processes.
- Ability to use hand-held tools for preventive maintenance, repairs, and tool changes.
- Skilled in reading and understanding of blueprints, specifications, and procedures.
- Detail-oriented with the ability to maintain accuracy and complete tasks promptly.
- Proficient in identifying nonconformances and maintaining organization.
- Intermediate skills in GD&T.
Preferred Skills
- Strong verbal and written English language communication skills.
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required.
- Ability to sit or stand for prolonged periods.
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive com...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485.
Summary of Position
Reporting to the Operations Manager, this position will have direct responsibility for the set-up and manufacture of components within the machining Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machine components.
Essential Functions
- Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills.
- Perform offsets and tool changes to ensure efficient production.
- Set up complex legacy components and new production orders for steady machine operation.
- Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, vision systems.
- Perform scheduled and regular preventive maintenance on equipment.
- Lead and train in problem solving activities for complex machine or process issues.
- Complete and compile documentation related to quality inspection standards.
- Ensure proper material control, identification, and traceability for conforming and nonconforming materials.
- Lead and train in Quality Best Practices and contribute to continuous improvement in GDP/GMP.
- Utilize ERP and QMS systems to document and control inspection and traceability activities.
- Perform Zeiss (or similar) CMM Gauge R&R activities for NPI.
- Perform all AQL in production with all data being entered into the ERP system.
- Perform Qualification runs on NPI to the customers specifications.
- Perform the first article inspection with minimal support.
- Capable of mentoring and training lower-level machinists.
- Perform FANUC (or similar) robot adjustments on basic programs.
- Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- Certification from a Machine trades technical school program, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
Experience
- Certification from a Machine trades technical school program and ten years relevant work experience in a regulated medical manufacturing environment, or fifteen years in a regulated medical manufacturing environment.
Qualifications
- Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials.
- Knowledge of and experience with GMP/ISO standards.
- Advanced understanding of mechanical equipment usage, care, and inspection processes.
- Ability to use hand-held tools for preventive maintenance, repairs, and tool changes.
- A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance.
- Proficient reading and understanding of blueprints, specifications, and procedures.
- Detail-oriented with the ability to maintain accuracy and complete tasks promptly.
- Proficient in identifying nonconformances and maintaining organization.
- Advanced skills in Excel and Microsoft word.
- Strong verbal and written English communication skills.
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required.
- Ability to sit or stand for prolonged periods.
Job Features
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive com...
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485.
Summary of Position
Reporting to the Operations Supervisor, this position will have direct responsibility for the manufacturing of components through various basic functions within the Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, operate equipment, and perform visual and dimensional inspections on machine components.
Essential Functions
- Operate and maintain 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes.
- Perform visual and dimensional inspections on manufactured components, as required using a microscope, micrometer, caliper, pin gauges, thread gauges, comparator, Micro-Hite, etc.
- Support problem-solving activities for complex machine or process issues.
- Complete and compile documentation related to quality inspection standards.
- Ensure proper material control, identification, and traceability for conforming and nonconforming materials.
- Support Quality Best Practices and contribute to continuous improvement efforts of GDP/GMP.
- Utilize ERP and QMS systems to document and control inspection and traceability activities.
- Must maintain safe working conditions and follow occupational safety and health requirements including Personal Protective Equipment (PPE) guidance and rules.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Experience
- Minimum of 0-2 years’ experience in a regulated manufacturing environment.
Qualifications
- Basic understanding of the usage and care of mechanical equipment and inspection processes.
- Ability to use hand-held tools for preventive maintenance, repairs, and tool changes.
- Ability to effectively read and understand blueprints, specifications, and procedures.
- Detail-oriented with the ability to maintain accuracy and complete tasks promptly.
- Basic understanding of GD&T.
- Knowledge of GMP/ISO standards.
Preferred Skills
- Class I, II and/or III Medical Device manufacturing experience.
- Regulated manufacturing industry experience (e.g., aerospace, defense, pharmaceutical, etc.).
- Strong verbal and written English language communication skills
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required.
- Ability to sit or stand for prolonged periods.
2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM
1st shift- No differential
Pay range: $21.00 - $27.00 / hr
Job Features
TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive com...
Summary of Position
Reporting to Department Manager, this position will have direct responsibility for the quality control functions within the Department. TOMZ manufactures parts via high precision metal machining, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation and/or perform inspections on machined components by utilizing conventional layout inspection techniques and equipment.
Essential Functions
- Perform further complex inspections on machined components utilizing methods such as comparators, CMM and/or various manual and automated techniques.
- Perform and provide training assistance for inspections on machined components, as required, utilizing conventional visual and layout inspection techniques and equipment. Ex. include microscopes, calipers, micrometers and gages.
- Execute Incoming, First Piece, FAI, In-process, and Final Inspection, as assigned.
- Completes and compiles necessary documentation related to Quality Inspection standards.
- Ensure proper material control, identification and traceability is maintained for conforming and nonconforming material through the manufacturing processes.
- Accurately review and ensure Good Document Practices (GDP) are upheld for Routers/Inspection Plans/Device History Records (DHRs) throughout the manufacturing process and in preparation for final lot release/shipment.
- Support Quality Best Practices and GDP/GMP continuous improvement efforts.
- Utilize and navigate ERP and QMS systems to ensure inspection and traceability activities are properly documented and controlled, as needed.
- Utilize the ERP system to prioritize and support product final acceptance and shipment, as needed.
- Generate Packing Slips and Certificates of Compliance (C of C) in accordance with TOMZ and/or customer requirements.
- Support physical and/or electronic record retention.
- Must follow occupational Safety and Health requirements including Personal Protective Equipment (PPE) guidance and rules.
- Other duties and responsibilities as assigned.
Qualifications:
Education
- High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
Experience
- Minimum of 3-5 years’ experience in a regulated manufacturing environment.
Qualifications
- Regulated manufacturing industry experience (e.g. Aerospace, Defense, Pharmaceutical, etc.)
- Ability to effectively read and understand blueprints, specifications and procedures.
- Knowledge of dimensional, visual and mechanical inspection processes.
- Strong background concerning the usage and care of mechanical measurement equipment, tools and hand-held tools including micrometers, calipers, dial indicators, height gages, pin gages, etc.
- Maintains accuracy and attention to detail at all times and completes tasks in a timely manner.
- “Hands-on” self-starter with ability to work both independently and as part of a team.
- Strong verbal and written English language communication skills.
- Competency with Microsoft Office (i.e. Outlook, Word, Excel, and PowerPoint).
- Ability to work with a variety of functional areas, including R&D, Manufacturing, and QA, as required, accomplishing results with minimal guidance.
Preferred Skills
- Quality certification(s) (e.g. ASQ CQT, QCI, etc.).
- Class I, II and/or III Medical Device manufacturing experience.
- Knowledge of and experience with GMP/ISO standards.
Pay Range: $23 - $29 an hour
Summary of Position Reporting to Department Manager, this position will have direct responsibility for the quality control functions within the Department. TOMZ manufactures parts via high precision m...
Summary of Position
Support the organization’s Turning Milling and Grinding operations of complex medical devices through new development projects as well as optimization of existing legacy programs. Work in cross functional teams to drive continuous improvement and ensure production objectives are met; including but not limited to programming for new product development, optimization of legacy programs for improved throughput, standardization of programs to current best practices, and research and implementation of new tooling and process technology. Creating 1st pc and in- process inspection plans, process validations, equipment specification for production line-up and fixturing design.
Essential Functions
Duties and responsibilities include, but are not limited to:
- Ability to program various pieces of CNC equipment across multiple sites as directed to support critical and/or high-value projects milling, turning, and grinding, Multi spindle, Multi Axis and Swiss style programs for manufacture of medical devices- implants and instruments.
- Analyze drawings, design models, and sketches to determine dimensions and configuration of cuts, selection of cutting tools, machine speeds, and feed rates according to shop processes, customer specifications, and machine capabilities.
- Actively participate in process development projects and DFM with internal and external teams
- Revise programs to eliminate instruction errors, omissions, and update programs with new technology/methods to improve efficiency; meet customer delivery dates
- Coordinate with Quality Engineering to help facilitate the development of Process Control Plans, Manufacturing Inspection Plans, and gaging/fixturing requirements.
- Create 1st pcs and in-process inspection plans.
- Design fixtures for post processing operations.
Qualifications:
Education
- Associate degree in technical or scientific field or equivalent work experience.
Experience
- Minimum of 5 years’ experience of programming in a medical device manufacturing environment or similar
Preferred Skills/Qualifications
- Strong knowledge of NC Code, Tooling, and Manufacturing Process.
- Knowledge of CAD/CAM software (SolidWorks and Esprit preferred)
- Blueprint reading and knowledge of Geometric Dimensioning and Tolerancing (GD&T)
- Effective communication to all levels of internal and external customers
- Ability to apply logic and reasoning to solve complex problems.
Summary of Position Support the organization’s Turning Milling and Grinding operations of complex medical devices through new development projects as well as optimization of existing legacy programs...
Summary of Position
TOMZ is looking for a highly driven Metrology Specialist to join our organization in Berlin, CT! This position will be responsible for the activities associated with developing advanced metrology methods in a medical device manufacturing environment. This includes but is not limited to assessing process risk and implementing appropriate control mechanisms, corrective / preventative action, and creating and refining test methods.
Essential Functions
- Operates and programs advanced measurement equipment including Vision Systems, CMMs, PLCs, Optical Sensors, Contractors, and Laser Measurement Systems.
- Acts as the Subject Matter Expert in GD&T
- Uses expertise in bench layouts to resolve complex measurement challenges.
- Collaborates and defines Test Method.
- Expertise of precision measuring instruments and their application, including but not limited to, electronic height gages, calipers, micrometers, depth gages, indicators, and plug and thread Go/No Go gages.
- Execution and evaluation of Test Method Validations.
- Support the creation of production visual standards and standardized acceptance criteria for TOMZ’s manufacturing processes.
- Design, Model and Build inspection work holding fixtures.
- Provides hands on direction for executing Incoming, In-Process and Final Product Inspection plans.
- Champion First Article Inspections.
- Support Gage calibration review, management, execution, and evaluation.
- Establish standards for Gage Calibration.
- Competency with materials testing chemistry and mechanical testing.
- Support and enforce Quality Best Practices and GDP/GMP continuous improvement efforts.
- Support the tracking and reporting of inspection data, including but not limited to rejection rates, defect modes and process trends across customers/product families.
- Reviews ECOs for the release of Quality Engineering documentation.
- Creates inspection instructions.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- High School Diploma or GED
Experience
- Minimum of 4 years’ experience in a regulated manufacturing environment.
- Minimum of 3 years of manufacturing quality experience including advanced metrology experience including CMM and/or Vision System programming.
- 3+ years training in GD&T and measurement programing system.
Qualifications
- Demonstrated self-starter with ability to work in a fast-paced environment.
- Competency with Microsoft Office
- Strong verbal and written English language communication skills.
- Basic understanding of statistical techniques and sampling strategies
Job Features
Summary of Position TOMZ is looking for a highly driven Metrology Specialist to join our organization in Berlin, CT! This position will be responsible for the activities associated with developing adv...
Summary of Position
TOMZ is looking for a highly skilled Quality Inspector III to join our team in Berlin, CT! Reporting to quality leadership, this position will have direct responsibility for the quality control functions within the Department. TOMZ manufactures parts via high precision metal machining, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation and perform inspections on machined components by utilizing conventional layout inspection techniques and equipment.
Essential Functions
- Demonstrate team leadership, train, and provide guidance to Quality Control personnel.
- Aligns and prioritizes workload. Creates targets and expectations for work performance.
- Coaches and corrects team as required.
- Provides input for performance appraisals to employees.
- Train and perform inspections on machined components and assemblies using visual and layout techniques and equipment, such as microscopes, calipers, micrometers, and gages.
- Create, complete, and compile documentation related to Quality Inspection standards, ensuring proper material control, identification, and traceability throughout the manufacturing processes.
- Ensure conformance to Quality standards by reviewing Device History Records (DHRs) and ensuring they align with the Device Master Record (DMR), and that Good Document Practices (GDP) are maintained for Routers, Inspection Plans, and DHRs during the manufacturing process and final lot release.
- Utilize ERP and QMS systems to document inspection activities, ensure traceability, and maintain proper control of records.
- Support continuous improvement efforts aligned with Quality Best Practices and GDP/GMP standards.
- Execute Incoming, In-process, and Final Inspections as assigned, recording nonconformities, ensuring follow-up actions, and moving materials into MRB if issues remain unaddressed.
- Perform material sorts as needed, ensuring nonconformities are identified and addressed.
- Follow safety and health requirements, including Personal Protective Equipment (PPE) guidance and rules, throughout all tasks.
- Adapt to different quality standards, production lines, and teams, and move between multiple departments and production lines as required with a proactive approach.
- Support other Quality Department functions as needed, ensuring flexibility in role responsibilities.
- Support physical and electronic record retention processes as needed.
- Ability to use more complex measurement equipment (Comparator, Vision System, Basic CMM operation)
- Performs process audits to ensure that processes are being performed in accordance with procedures and standard work.
- Trains others to clarify standards and requirements.
- Train and perform further complex inspections on machined components utilizing methods such as comparators, CMM, vision systems, contracers and automated techniques.
- Provide basic programming assistance for complex inspection and test methods, as required.
- Execute First Piece, FAI Inspection, as assigned.
- Supervises and trains others on sorting activities and inspections.
- Evaluates compliance process controls (i.e. SPC, Precontrol, Tool Life, Process Parameter) and train others on process standards.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
Experience
- Minimum of 5 years’ experience in a regulated manufacturing environment or equivalent education and experience.
Qualifications
- The ability to effectively read and understand blueprints, specifications and procedures.
- Maintains accuracy and attention to detail at all times and completes tasks in a timely manner.
- Knowledge of dimensional, visual, and mechanical inspection processes.
- Competency with Microsoft Office.
- Ability to work both independently and as part of a team.
- Verbal and written English language communication skills.
- Basic mathematical computational ability
- Strong background concerning the usage and care of mechanical measurement equipment, tools and hand-held tools including micrometers, calipers, dial indicators, height gages, pin gages, etc.
- Class I, II and/or III Medical Device manufacturing experience.
- Regulated manufacturing industry experience (e.g., Aerospace, Defense, Pharmaceutical, etc.)
Summary of Position TOMZ is looking for a highly skilled Quality Inspector III to join our team in Berlin, CT! Reporting to quality leadership, this position will have direct responsibility for the qu...
Summary of Position
Reporting to the Engineering Manager, this position will support the Manufacturing Engineering team in developing and implementing robust cost-effective manufacturing processes and methods along with day-to-day tasks. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices.
Essential Functions
- Prepares engineering change orders and coordinates the deployment of changes including training operation team members.
- Develop and qualify various tools and equipment required for manufacturing processes.
- Develop and improve manufacturing process instructions, product flow, assembly methods, space allocation, product quality and safety performance for both sustained and new products.
- Perform tool life studies to drive efficiency and cost savings opportunities.
- Conduct Process Capability studies during manufacturing processes to support achieving objectives.
- Collaborates with cross-functional teams during the production transfer phase to establish and launch robust, mid to high volume processes.
- Supporting required equipment qualification and process validations (IQ, OQ and PQ).
- Troubleshoot manufacturing processes when defects occur.
- Disposition non-conforming products and develop re-work procedures.
- Participate in Kaizen events and continuous improvement efforts.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- Pursuing a degree in Engineering or equivalent experience.
Experience
- N/A
Qualifications
- Must possess a high attention to detail.
- Familiar with reading drawings and specifications containing GD&T.
- Proficiency in SolidWorks.
- Proficient in the use of Microsoft Office and Adobe products.
- Ability to work in a fast-paced Medical Device Manufacturing environment with high output efficiency and impeccable quality standards.
Preferred Skills
- Exhibit good time management skills and ability to prioritize workflow throughout the day.
- Motivated self-starter with ability to work both independently and as part of a team.
- Strong verbal and written English language communication skills.
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 20 pounds. Team lift or mechanical assistance required for objects over 20 pounds.
- 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products.
- Exposure to oil, grease, dust, metal particles, sparks, sharp-edged materials. Some exposures may require the use of personal protective equipment or engineering controls.
- Perform keyboard entries with possible frequent operation of a computer
Summary of Position Reporting to the Engineering Manager, this position will support the Manufacturing Engineering team in developing and implementing robust cost-effective manufacturing processes and...
Summary of Position
Reporting to the cell lead, this position will have direct responsibility finishing and preparing machined parts by removing burrs, sharp edges, and excess material using hand tools, power tools, and finishing equipment. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation ensures parts meet quality standards and specifications before final processing, assembly, or shipment.
Essential Functions
- Perform deburring, polishing, and surface finishing on machined or fabricated components.
- Use hand tools (files, scrapers, deburr knives, sandpaper), power tools, and tumbling equipment to remove sharp edges and imperfections.
- Inspect parts for quality conformity using calipers, micrometers, gauges, and visual inspection.
- Follow work orders, prints, and specifications to ensure parts meet customer and internal requirements.
- Maintain accuracy and attention to detail while working with small and delicate parts.
- Operate bead blast or tumbling equipment (as applicable).
- Clean, organize, and maintain workstation and tools.
- Report nonconforming parts or material issues to production or quality personnel.
- Meet production goals and timelines while maintaining high quality standards.
- Follow safety guidelines and company procedures at all times.
- Adhere to the TOMZ Quality Management System.
- Perform other duties as assigned.
Qualifications:
Education
- High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred).
- Certification from a technical school program is strongly preferred.
Qualifications
- Strong manual dexterity and ability to handle small components.
- Ability to read basic blueprints and interpret work instructions.
- Familiarity with measurement tools (calipers, micrometers, gauges).
- Strong attention to detail and quality-driven mindset.
- Precision and quality-focused
- Time management and ability to meet deadlines
- Communication and teamwork
- Problem-solving and adaptability
- Hand-eye coordination and fine motor skills
Preferred Skills
- Previous experience in deburring, machining, or manufacturing environment is a plus.
- Regulated manufacturing industry experience (e.g., Aerospace, Defense, Pharmaceutical, etc.)
Physical Demands
- Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds.
- Exposure to oil, grease, dust, metal particles, sparks, sharp-edged materials. Some exposures may require the use of personal protective equipment or engineering controls.
- Ability to sit or stand for prolonged periods.
- Good eyesight and focus for detailed work.
- Manufacturing floor environment with moderate noise levels.
$16 - $22 an hour
Summary of Position Reporting to the cell lead, this position will have direct responsibility finishing and preparing machined parts by removing burrs, sharp edges, and excess material using hand tool...
Our Mission
Advancing quality of life by manufacturing medical devices for global healthcare companies.
We Manufacture Medical Devices
We specialize in manufacturing the best medical device implants for medical teams and surgeons around the world. Most of our team will tell you that the work is very fulfilling because we help people live better lives.
Company Values & Culture
Our DNA is as unique as everyone that works here.
Put Patients First
Embrace Diversity
Learn & Grow
Reward Great Effort
Why Work at TOMZ?
We are large enough to offer stability and great benefits, yet small enough to recognize you as an individual and not just “another employee.”
Multiple departments from facilities management to engineering allows you to explore different career paths.
The medical devices industry is experiencing explosive growth with no signs of stopping any time soon.
We have completed our 8th expansion which includes amenities such as locker rooms, showers, an expanded cafeteria, and more.
We have a deep bench of knowledgeable pros to help you.
Everything from 401K to top-of-the-line healthcare, life insurance, and more!
What Our Team Members Have to Say
Playlist
2:37
2:12
Benefits
401(k) Retirement Plan
We will match $0.50 on the dollar up to an 8% contribution. Work with us, retire with us.
Overtime Available
Opportunities to earn overtime hours are available as needed.
Paid Holidays
Enjoy 9 paid holidays off per year.
Paid Time Off (PTO)
PTO starts accruing from the day you start.
Referral Bonus
Employees are eligible to earn a $3,500 referral bonus!
Health Insurance Plans
Enjoy a low employee co-pay with high contributions towards your plan.
Dental Insurance Plans
Yes - we have a great dental plan as well!
Quarterly Bonus
Teams achieving set performance goals receive a quarterly performance bonus.